Electrician Pikesville, MD
Electrician in Pikesville, MD: a local, licensed electrician in one call
Looking for an electrician in Pikesville? Call (815) 456-4349. Moore Power Electrical is a referral service that puts Pikesville homeowners and landlords in touch with independent electricians who hold a Maryland license and are registered in Baltimore County.
- Maryland
licensed pros - Permits pulled
when required - Pikesville
and nearby - Written estimate
before work
Pikesville. Wired right.
Local homes.
Local rules.
Licensed hands.
Who we are
We connect you with an electrician. We are not the electrician.
Moore Power Electrical is a phone referral service. We hold no electrical license and we do not send our own crews.
We have no tie to any Pikesville or Baltimore area contractor with a similar name. When you call, we pass your job to an independent electrician who works in Pikesville.
That electrician quotes the job, does the work and handles any warranty. The referral costs you nothing.
- Describe the jobTell us what is wrong, your street or ZIP and how soon you need help.
- Licensed and county registeredWe refer work to Maryland-licensed electricians who can pull Baltimore County permits.
- Price in writingThe electrician agrees the scope and price with you before starting.
Local and licensed
What "licensed electrician in Pikesville" means
A licensed electrician in Pikesville needs two things. The first is a Maryland license from the State Board of Electricians. The second is a registration with Baltimore County.
Baltimore County states that all state-licensed master electricians must be registered in the County to do work there. Only a licensed electrical contractor registered with the County can apply for an electrical permit.
A contractor doing home improvement work also gives a Maryland Home Improvement License number on residential permit applications. Ask for all three numbers before work starts.
Three numbers to ask for
- Maryland electrician license: master electrician, issued by the State Board of Electricians.
- Baltimore County registration: lets the contractor pull County electrical permits.
- MHIC license: needed by contractors doing home improvement work.
Electrical services in Pikesville
Electrical services we connect in Pikesville
Not sure which one you need? Call and describe what is happening. We will match you with a licensed electrician who does that work.
Permits
Electrical permits in Pikesville come from Baltimore County
Pikesville is an unincorporated community. It has no city government, so the Baltimore County Department of Permits, Approvals and Inspections (PAI) handles every electrical permit and inspection.
Permits office
Department of Permits, Approvals and Inspections, County Office Building, 111 West Chesapeake Avenue, Towson, MD 21204.
Phone 410-887-3900, Monday to Friday, 8:30 a.m. to 4:30 p.m.
Applications are filed online through the County permit portal.
Electrical inspections
The Electrical Inspections office is in Room G-24 of the same building.
Inspectors visit each district on set weekdays, so book the inspection for your district's day.
The County enforces the 2023 National Electrical Code for permits issued after August 31, 2023.
- The registered contractor applies for the permit and pays the fee. Homeowners do not file County electrical permits for a contractor.
- A new or upgraded service needs a County permit and inspection before BGE reconnects power.
- Keep the permit number. Buyers, lenders and insurers often ask for it later.
Before work starts
How to check a Pikesville electrician's license
The Maryland State Board of Electricians sits in the Maryland Department of Labor. It licenses master electricians, journeyperson electricians and apprentices.
An apprentice must work under a licensed master or journeyperson at all times. An apprentice does not run a job alone.
- 1. Get the license numberAsk for the master electrician's Maryland license number.
- 2. Use the state searchLook it up in the Maryland Electricians License Search on the Department of Labor website.
- 3. Confirm County registrationAsk whether the contractor is registered with Baltimore County, since only registered contractors pull permits.
Storms and BGE
Summer storms, fallen trees and BGE outages
Summer thunderstorms in Baltimore County bring down trees, limbs and power lines.
Storms on the weekend of July 4, 2026 left tens of thousands of BGE customers in and around Pikesville without power, some for several days in high heat.
BGE fixes its lines, poles and the service drop up to the house. An electrician fixes damage on your side: the mast, the meter base, the panel and the wiring inside.
After a storm
- Stay away from any downed line and report it to BGE.
- If the mast or meter base was pulled off the house, call an electrician. That repair needs a County permit and inspection.
- Run a portable generator only through a transfer switch or approved interlock, never through a wall outlet.
- Have a surge protective device added at the panel to protect electronics when power returns.
Older homes
What wears out in Pikesville's post-war houses
Pikesville grew fast after World War II, when many families moved out from East Baltimore. Many of its houses date from those decades.
Homes of that age were wired for far less load than a modern kitchen, central air and home office need. Many also lack the outlet protection that newer codes require.
Common findings in older homes
- Two-prong outlets with no ground
- No GFCI protection in kitchens, baths or basements
- Small panels with few open spaces
- Switch boxes with no neutral wire for smart switches
- DIY basement or attic wiring done without a permit
Cost factors
What changes the price of electrical work in Pikesville
We do not set prices. The electrician gives you a written price after seeing the job.
These factors move the price up or down:
- AccessPlaster walls, finished basements and tight attics take longer to fish wire through.
- County permitPermit fees and the inspection schedule add time and cost to permitted jobs.
- BGE coordinationService work needs BGE to disconnect and reconnect the meter.
- UrgencySame-day and after-storm calls usually cost more than a booked visit.
From call to final inspection
How a typical Pikesville job works
You call
Tell us what is happening, your ZIP and how urgent it is. Have a photo of the panel label ready if you can.
We connect you
We match you with an independent, licensed electrician who handles that kind of work near you.
Estimate and permit
The electrician confirms the scope in writing and pulls a permit when the job needs one.
Work and inspection
The work is done, the local inspector signs off when required, and the utility reconnects service if it was disconnected.
Areas we serve near Pikesville
Your neighborhood, your local electrician
We connect homes and businesses in Pikesville and nearby Maryland communities.
- Stevenson
- Gwynn Oak
- Owings Mills
- Windsor Mill
- Randallstown
- Lutherville Timonium
- Woodstock
- Towson
- Hunt Valley
- Baltimore
- Reisterstown
- Cockeysville
ZIP codes we serve
- 21208
Before you call: your ZIP, a photo of the panel label, and when the problem started.
Call (815) 456-4349Questions we hear
Electrician Pikesville FAQs
Talk to a licensed electrician
Describe the problem and your ZIP. We will connect you with a local pro in Pikesville.
Call (815) 456-4349How do I find a licensed electrician in Pikesville, MD?
Call (815) 456-4349. We connect you with an independent electrician who holds a Maryland license and is registered in Baltimore County. You can check the license in the Maryland Electricians License Search.
Is Pikesville its own city for permits?
No. Pikesville is an unincorporated community in Baltimore County. Electrical permits come from the County Department of Permits, Approvals and Inspections in Towson, phone 410-887-3900.
Can I pull my own electrical permit in Baltimore County?
Baltimore County says only a licensed electrical contractor registered with the County can apply for an electrical permit. Your electrician files it online.
Who do I call when the power goes out in Pikesville?
Call BGE when your street is dark or a line is down. Call an electrician when only part of your home has no power or the meter or mast was damaged.
Who disconnects solar panels before a roof replacement?
A licensed electrician or your solar installer disconnects and reconnects the system. Work on the electrical side needs a Baltimore County permit when the wiring is changed.
Is Moore Power Electrical a Pikesville electrical company?
No. Moore Power Electrical is a referral service. We are not linked to any local electrical company with a similar name.
Page updated 2026-10-25.